Air intake method of dissolved air floatation machine

          Dissolved air floatation machine, suitable for processing low turbidity, high color, high organic content, low oil content, low surface

Active substance content or algae-rich water. So what is the air intake method of this air float? The following is for you

Let me introduce you:

        There are two air intake methods for the dissolved air floatation machine. The shallow air floatation machine is the air intake
before the pump and the air intake after the pump. Dissolved air floatation machine Intake air in front of the pump, which is led
by a water pipe from the pump pressure water pipe to the suction pipe, and a water jet is installed on the branch pipe.

        When the waste water passes through the hydraulic ejector, it will cause negative pressure. After inhaling the air and mixing
it with the waste water, it will be sent through the suction pipe and the water pump .Dissolved gas tank. This method omits the
air compressor, which is relatively simple and the water and air are mixed evenly, but the pump needs to use self-priming

Inflow, and keep the head above 1m. In addition, its large suction volume cannot be greater than that of the pump10%, otherwise,
the pump will be unstable and cavitation will occur.

        The intake air after the pump is usually fed with compressed air on the pressurized water pipe. This method makes the pump work stable, and

It is not necessary to work under positive pressure, but the air needs to be supplied by the air compressor. In order to ensure a good dissolved gas
effect, The volume of the dissolved gas tank is also relatively large, and generally a more complicated filled dissolved gas tank is required.

       The above is the air intake method of the dissolved air floatation machine. I believe you must have a deeper understanding of the dissolved air floatation machine.

        I hope the above can help you.